Printable View
Anyone know how to make a clock in reaktor that puts out a fixed number of pulses then shuts up and stops counting till I hit a trigger button again ... I can't get my head around this for some reason. Looks like it should be possible with the freqency divider but for some reason it's really non-trivial.
there are a bunch of ways you could do it, but a modulo should do the trick.
i don't have reaktor in front of me and i haven't done any building for a while, but try putting a switch on the output of the clock and a modulo between the clock and the switch. then set the modulo to the number of pulses and rig it so when the remainder = 0, the switch goes off, until it's triggered again.
It's the switch going off thing I was struggling with, they have a frequency divider which works a bit like modulo ... will get back on it later. thanks!