Printable View
When using my drum machine I have my drum loops all playing and eq'd nicely within
the hardware itself... I then record each drum part seperately keeping their own
eq and effect elements etc.. but when i play them back in cubase they sound
awfull and muddy as hell ..
any ideas?
why don't you, instead of recording the sounds individually, hook the machine into cubase as midi and then export it as an audio loop? not sure it will solve the problem, but worth a shot...
...what drum machine is it, btw, and what are you using to input the sounds into your CPU?
I am using midi.. Its a korg electribe emx1 and im recording though a m-audio ozoneQuote:
Originally Posted by SlavikSvensk
midi controller/sound card
I am recording them individually because I want to be able to apply delay and reverb
on the drum sounds individually.
are you sequencing through the electribe or are you sequencing through your software?
Try drawing in the notes on the computer instead of designing the pattern on the box.
Maybe that would help. Its worth a shot
got another idea...it might be that it's recording the sound of the machine with the computer's internal microphone instead of a line-in. are you using a pc or a mac?
what bit rate /sampling rate are you recording at ?
Im sequencing in cubase.Quote:
Originally Posted by tekara
Unfortunately not. Its a studio soundcard.Quote:
Originally Posted by SlavikSvensk
44kHz, 16bit, stereo.Quote:
Originally Posted by FILTERZ
Im not sure if i was clear enough in what Im saying... The sound quality of
the recorded wav is perfect. But when I play the individual components back
together they are muddy with each other.. almost as if the electribe is a lot
better at playing back the sounds and Eqing them into their own space.
How about if you try recording them all individually, but without any EQ / FX etc.?
thats even worse.. mud central lol
Are you recording them through any FX? Anything at all?
that might not matter, you know. i've had that problem with my fw410. tell me a bit abot your computer. mac or pc? is the soundcard internal or external? is there another audio interface (maybe original one that came with computer) still installed? are you using the most current drivers?Quote:
Originally Posted by Milesy
also, have you tried recording another instrument through the line in or midi? you should...if it sounds fine, you know the prob is with the electribe or how it communicates with the cpu. if it sounds crappy, then you know the prob is with the cpu or cubase.
I've had a similar problem with various bits of kit - I think yeah it'll sound better if I record all the parts seperately then eq in the computer but it doesn't...Quote:
Originally Posted by Milesy
Are you over processing it in the computer - ie trying to do too much, or is it something simple like when you put them together the summed output is just too loud - ie not enough headroom in the cubase mixer? It's a simple thing and hence maybe not thought of it but have you tried lowering the fader loads on the individual sounds when you mix them back in cubase and making sure you're cutting any bits out with the EQ that you don't need?
You can push loads of stuff together through a mixer (which essentailly will be what's inside the electrivbe to mix the sounds) and it'll sound ok (ish), but sometimes the same things at the same sort of volume in a software mixer does sound shite and muddy.
If you have your drum machine hooked up via midi leads into your controller keybord and then recording your patterns then you will be recording midi not on note off data not audio wav's. The sound could be muffled or muddy because of the playback settings within your drum manchine or somewhere along the playback chain are set so. Check your resonance and filter settings becuae even if they are not engaged for normal playback they may be once midi data is fed back through the unit once the korg becomes a sound module.Quote:
Originally Posted by Milesy
you could also try replacing the midi leads for audio leads and take the feed from the korg out of the l+r jacks and plug directly into the unbalenced L+R jacks in the o zone controller keybord. record the patterns as mono wavs, then bounce down all the patterns to a stereo wav. hope this helps
again.. its not a problem with the actual wavs... sorry i know its confusing.
example.. i write a drum loop
record the hats to one audio channel
toms to another
rides to another.
each of these play back EXACTLY as the drum machine plays them... exactly.
but when i play everything together I need to eq everything in cubase again to get them
sitting in their own sonic space.
The audio channel that you record into has all the fx, Y/N
You will possibly need to copy the audio channel that has all the effects several times. Copy one for the toms, rides etc. Other than that, set up a fx channel and send all the recorded wavs to that.?
how are you auditioning the electribe