-= FREE VST Plugins Thread =-

Cobra 1

http://www.plugindex.de/uploads/medi...te17/cobra.jpg

A physical modeling helicopter synthesizer.

Features:
12 helicopter controls
oscilliscope

http://omalleysound.panicnow.net/cobra1.html

http://omalleysound.panicnow.net/data/cobra1.zip

XX-Drum-Modules

http://www.acquitrecords.com/media/s...kjeff460-2.jpg


XX hi-hats n' cymb v2: is the last xx-module in this series. Each sound can be send to 2 additive Delay-effects, Pitch, Volume.

XX snares v2: Pure Snare Synth. 2 Oscillators per Preset, Filter (HP, LP), Delay, Volume.

XX percussion v2: Simple percussion-synth with 8 perc-sounds per preset. Each sound can be send to 2 additive Delay-effects, Pitch, Volume.

XX b-drum v2: Pure Bassdrum Synth. 2 Oscillators per Preset, Filter (HP, LP), Delay, Volume.
GUI works by Acquit Music. (c)2005.

http://www.acquitrecords.com/4681.html

Bundle download:

http://www.plugindex.com/index.php?t...d&file=770

http://iluvtekno.com/MARTIN LOOPDON/rename.mp3

Voxengo Boogex

http://www.voxengo.com/files/scrn/bo...-large1024.jpg

Boogex is a free guitar amplifier plug-in with a variety of sound shaping features.

Features:

- Emphasis and Cut Filters. These are used to shape the sound of an amplifier.
- Pre-filter. Used to filter the incoming guitar signal. This is usually useful if the pickups on the guitar are too boomy or too crisp.
- Amplifier. This part is usually represented by a single Drive knob on actual guitar combos. The concept has been refined in Boogex and it is possible to get very different overdrive tones using four knobs. The Tone knob adjusts the character of distortion (or selects 'channel' like in some guitar combos - from clean to overdriven). With low tone value you will get a mild distortion, while with higher tone values distortion will be heavier. Dynamics adjusts the dynamic response of the amplifier - its effect is most evident with low Phase parameter values. The Phase parameter adjusts the overdrive performance - it is possible to fine-tune harmonical structure of the overdrive - for example if you hear too much discord tuning the Phase parameter may help. In some cases Phase also works as a mic displacement control - you can get different degrees of tone with it.
- Speaker cabinet impulse response selects which speaker cabinet model (and mic) to use. Loads WAV or AIFF audio files.
- Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).
- Several example factory presets are included.

http://www.voxengo.com/product/boogex/

http://www.voxengo.com/files/Voxengo...nVST_setup.zip

killerGATE+

http://www.novakill.com/images/GateFXfull.png

killerGATE+ is a multi-effect centred around a 32-step gate sequencer synchronised to host tempo. It includes a state-variable filter, LFO and distortion.

Gate features:

Envelope/gate mode.
Envelope with attack and decay.
Limited tie function.
Sample & hold to add randomness to gate levels.
Filter features:

Low/High/band-Pass and Band-Reject modes.
12/24dB per octave switchable.
Filter saturation for a fatter sound.
LFO features:

Synchronised to host tempo.
7 different waveforms.
Modulates Cutoff and Amp.
Distortion features:

High excite and low cut controls.
Wet/dry mix.

http://www.novakill.com/killerz.htm

http://www.novakill.com/zip/killerGATE+.zip

Filllter

http://www.scamme.audioshot.net/Filllter.jpg

Filllter is a simple LP / HP / BP / Notch / Moog filter plug-in.

http://www.scamme.audioshot.net/downloads.html

http://www.scamme.audioshot.net/Filllter_VST.rar

DistBit

http://thefilebucket.com/userfiles/S...tBit%20GUI.png

Coldfire Software's DistBit is a recently-completed VST damage processor. it was inspired by the Scream4 unit from Propellerhead Software's Reason. It consists of a pair of filters and a pair of multi-mode distortion units. Each unit is capable of 8 different kinds of distortion, and you can set up the overall signal routing however you want, making the DistBit a vesatile unit. Version 1.1 adds several nice MIDI features. Comes with 64 presets, freeware. Made with SynthEdit, but don't let that stop you from trying it out.

http://thefilebucket.com/userfiles/S...tBit/index.htm

http://thefilebucket.com/userfiles/S...tBit%201.1.zip

wikid, grabbing those drum synths now, looking pretty sweet

thanks, makes this worthwile... :lol:

Quote:

---

Originally Posted by loopdon

DistBit

http://www.skinjob.net/tsp/Coldfire%20DistBit.png

Coldfire Software's DistBit is a recently-completed VST damage processor. it was inspired by the Scream4 unit from Propellerhead Software's Reason. It consists of a pair of filters and a pair of multi-mode distortion units. Each unit is capable of 8 different kinds of distortion, and you can set up the overall signal routing however you want, making the DistBit a vesatile unit. Version 1.1 adds several nice MIDI features. Comes with 64 presets, freeware. Made with SynthEdit, but don't let that stop you from trying it out.

http://www.skinjob.net/tsp/Coldfire%20DistBit.exe

---

That sounds a bit good - link broken though... any chance of a yousendit?

check this, fella :twisted:

http://thefilebucket.com/userfiles/S...tBit/index.htm

/ links have been updated in the previous post..

Cheers matey, you the don. ;)

Quote:

---

Originally Posted by TechMouse

Cheers matey, you the don. ;)

---

tell me sth. new :twisted:

:lol: :lol: :lol:

Quote:

---

Originally Posted by loopdon

Quote:

---

Originally Posted by TechMouse

Cheers matey, you the don. ;)

---

tell me sth. new :twisted:

:lol: :lol: :lol:

---

... and so modest too ;)

haha, check this latest addition, homies, looks hella cool:

SubFix

http://nusofting.liqihsynth.com/images/subfix.jpg

NUSofting presets SubFix a bass enhancer VST plugin.

Currently available as free beta for Windows,
it will be released for Windows and as AU/VST for OS X as well.

The beta version expires on 29/08/2005,
it's not fully optimized and doesn't show the VU meters.

What it's for:

SubFix adds harmonic content to the bass range frequencies,
so it can be used as phycoacoustic bass enhancer on a mix
in the mastering process, to have bigger basses or to target
the mix to small multimedia speakers (replacing the inaudible low frequency
with relative harmonics).

But SubFix is designed also to enhance a single bass track, you can
use it as insert in a synth or sampler bass track to add the missing punch.

Please report bugs and suggestions.

Thanks,


Luigi


Controls:

Frequency: the crossover frequency in Hz, below this threshold the sound is processed

Sub gain: the level of the processed input

Treble gain: the level of the unprocessed input

Rich: the amount of harmonic generation

Solo Sub: bass only monitoring

Solo Rich: processed signal only monitoring

HPF Rich: extra boosting of the harmonic generation

Note: green to yellow led change is around zero dB

SubFix technology copyright 2005 Luigi Felici

--
Liqih aka luisi


http://nusofting.liqihsynth.com/zip/subfix.zip

Bug Drive - a multiband distortion plug-in

http://www.betabugsaudio.com/gui/BugDrive.jpg

http://www.betabugsaudio.com/Messe/BugDrive.zip

PhaseBug

http://www.betabugsaudio.com/images/Phase.jpg

Its primary function is to shift the phase of an incoming audio signal. This is a critical function in fixing source signals that have phase errors in relation to one another, which can cause inappropriate cancellation or reinforcement of frequencies in a mix.

http://www.betabugsaudio.com/dl.php?id=16

SpinBug

http://www.betabugsaudio.com/images/Spin.jpg

combines a traditional "rotary speaker" effect with a set of new possibilities and parameters, all packaged into a simple and beautiful interface. SpinBug uses phase relationships and a low freq. oscillator in order to reproduce an effect produced by Leslie speakers.

http://www.betabugsaudio.com/dl.php?id=17

posihfopit

http://www.savioursofsoul.de/Christi.../Armyfopit.png

posihfopit is a dynamic EQ effect plug-in.

With posihfopit you can easily equalize your audio material, but furthermore the plug-in will add a new color to the sound. Due to its unique transistor based algorithm, a small amount of soft distortion is applied according to the filter band used. This way your material gets "kind of more creamy".


loopdon's tip: there's a master window you can enable on a channel and then you can see for example stuff done on this eq on say channel 2 and channel 3. very, very nice feature. a general eq overview. enable by rightclicking and selecting..

several nice skins as well.

http://www.savioursofsoul.de/Christian/ --> vst plugins

http://www.savioursofsoul.de/Christi...Posihfopit.zip

some filter: http://www.kjaerhusaudio.com/classic-auto-filter.php

reverb: http://www.dasample.com/index.php?show=glaceverb

sample tank: http://sampletank.com/Main.html?STFreeDwn

havent try any of these yet,but sure i will!
check them out.
have fun

just went through the lot today...so ive got many vsti to start playing with.....


THANKS THANKS AND THANKS AGAIN.........

no problem, thanks for the feedback, mista green!

FREE OSCILLOSCOPE v1.0 for PC

http://www.progressaudio.co.uk/Oscilloscope/OscBig.jpg

Useful utility to allow you to monitor what's going on in your signals. Handy for developers and musicians alike!

http://www.progressaudio.co.uk/Oscilloscope/ProgOsc.zip

tiz some freaky shit:

ChordSpace public beta

http://www.chordspace.com/images/screen.png

Manual:

http://www.chordspace.com/app/Chordspace%20short.htm

http://www.chordspace.com/app/Chordspace.zip

Please report bugs to: beta@chordspace.com

...this is what you need to do in FL.

Here's the procedure:

- Load up Chordspace, let's say as an effect in a mixer channel

- from the dropdown menu below the icon on the left top, choose "show MIDI output" and choose a suitable output port, let's say 2

- load up an instrument, and assign its input (which is shown by default) port to the same, 2 in this case

- press one of those funky hexagram symbols in Chordspace and it outputs a note

- choose some arpeggio settings, such as UP, in Chordspace's lower right corner

- choose a speed for the arpeggio, say 1/4

- choose a root note in the big circle in the middle

- choose a chord from the hexagrams, just click on one and keep the mouse button pushed

... and you should hear an arpeggio emerging

Topaz EZfilter2 LE

http://www.topazproductions.co.uk/_gfx/vsts/Filter2.jpg

Topaz EZ Filter 2 LE is a Multi Mode Filter that includes some simple but very usefull features.

Filter types

LP/12
LP/24
BP
HP/12
HP/24

Cut Off freq + Envelope
Res + Envelope
Master Gain
Dry/Wet Mix
*Auto Boost, each mode boosts the Master Gain by a factor of 1 or 2 as the cut off is reduced*

Tip:
Hover mouse over dials to show CC's

This free version is fully functional but has a few features removed and saved for the full version including, 36 and 48 db filters, Auto Boost x 3 4 and 8x.

http://www.topazproductions.co.uk/pl...r2v.1.0_LE.zip

XYZControl VST

http://haydxn.net/content/tools/XYZC...XYZControl.jpg

Control 3 CC parameters at once with your mouse; control both the position of the ball and its size by using the mouse wheel whilst dragging it around.

Put it before a synth in a host that allows such routings. To aid with midi-learn functions, you can RIGHT-CLICK the CC selector controls to send a single midi message on that axis. The 'sens' control adjusts how sensitive the mousewheel response is.

The panel is resizable so you can have it take up the whole screen if you like. The controls are fully automatable too, so you can record your movements.

I hope you find it useful!

how to use it in fl:

you can use it in FL, you need to go to the menu on the top-left and change it to "show MIDI output port" and then set the port to a number (like 10) in the top-right of the plugin.

Then you set this same number (like 10) on the top-right corner of the plugin you wish to control.

http://haydxn.net/content/tools/XYZC...XYZControl.zip

Just about to grab some of this gear boys so thanks for your hard work Loopdon and anyone else whos contributed ;)

Just got some cool stuff(was looking for some beast distortion,bitcrushers and somthing for making dark atmos)


Just gotta say I love this stuff loopdon posted
http://www.tweakbench.com/index.php
thats a wicked site :clap:

Quote:

---

Originally Posted by loopdon

tiz some freaky shit:

ChordSpace public beta

http://www.chordspace.com/images/screen.png

Manual:

http://www.chordspace.com/app/Chordspace%20short.htm

http://www.chordspace.com/app/Chordspace.zip

Please report bugs to: beta@chordspace.com

...this is what you need to do in FL.


thats pretty smart actually

Here's the procedure:

- Load up Chordspace, let's say as an effect in a mixer channel

- from the dropdown menu below the icon on the left top, choose "show MIDI output" and choose a suitable output port, let's say 2

- load up an instrument, and assign its input (which is shown by default) port to the same, 2 in this case

- press one of those funky hexagram symbols in Chordspace and it outputs a note

- choose some arpeggio settings, such as UP, in Chordspace's lower right corner

- choose a speed for the arpeggio, say 1/4

- choose a root note in the big circle in the middle

- choose a chord from the hexagrams, just click on one and keep the mouse button pushed

... and you should hear an arpeggio emerging

---

some more toys to play with, nice one loopdon and the rest :cool:

http://home.btconnect.com/christophe...e-p8-small.jpg

this is the original superwaves vst synth, still free

http://home.btconnect.com/christopherg/main.htm

http://www.novakill.com/images/OVERthumb.gif

Good for distorted leads

http://www.novakill.com/killerz.htm

this is a nice work u have here loopdon and all you guys...

Thanks ;)

Dont know if this ones allready been posted, theres far too many to search through!!

Here it is anyway, hope its usefull ;)

http://www.topsitelists.com/start/cubasevst/

Quote:

---

Originally Posted by dis-tek

Dont know if this ones allready been posted, theres far too many to search through!!

Here it is anyway, hope its usefull ;)

http://www.topsitelists.com/start/cubasevst/

---

cool :clap:

am i being a muppet here? iv downloaded a load of these and iv unipped em but all iv got is the readme's and DLL files...no exe's...what do i do with a DLL file?
THANKS :cry:

Quote:

---

Originally Posted by JohnnySideways

am i being a muppet here? iv downloaded a load of these and iv unipped em but all iv got is the readme's and DLL files...no exe's...what do i do with a DLL file?
THANKS :cry:

---

copy the dll's into you vst plugins folder where the rest of you plug ins are stored, then update the plugins list, then re-start cubase, then they will apper in ur plugins/instruments list. i am going off the fact your using cubase?? if not i aint got a clue what you do with the dll's!! hehe

cheers m8 ;) yeh it works

Quote:

---

Originally Posted by JohnnySideways

cheers m8 ;) yeh it works

---

glad to be assistance to you sir!! jolly good!! enjoy the vst's!!

dunno if anyones seen this one b4...but its funny

http://www.slapmeister.com/slapclap.html

Quote:

---

Originally Posted by JohnnySideways

dunno if anyones seen this one b4...but its funny

http://www.slapmeister.com/slapclap.html

---

yes been posted already.

Monofilter LT

http://members.lycos.co.uk/nugenaudi...ilter%20LT.gif

Monofilter provides a simple interface designed to convert a stereo signal below a specified frequency into a mono signal. The balance knob allows adjustment of the remaining stereo signal above the cutoff frequency.

Useful for ensuring that sounds are suitable for mastering to vinyl and keeping a check on LF signals in general, especially where stereo effects processing has been applied.

http://members.lycos.co.uk/nugenaudio/downloads.html

http://members.lycos.co.uk/nugenaudi...genaudio/NuGen Audio MonofilterLT.exe

Sonicism Vintage Vocoder

http://www.encircle.co.uk/sonicism/i...oderscreen.jpg

Sparky the Magic Piano?
Want to make awesome robotic sounds like Daft-Punk, Kraftwerk, Vangellis, or Sparky the Magic Piano?.........

Then Sonicism's Vintage Vocoder is the audio effects tool that you've been crying out for.

Designed from the ground up to capture that classic analogue vocoder sound using today's DSP technology,
Sonicism's Vintage Vocoder is the most powerful, versatile and cost effective Vocoding solution available.

Features
Screaming analogue style filtering
>> cutoff frequencies from 0 to 11KHz
>> variable resonance (Q factor)
>> low-pass, hi-pass & band-pass modes
>> pre-post filtering options


Versatile and powerful Filterbank for analyzing the modulator signal
>> choose between 1 and 256 frequency analysis bands
>> configurable analysis range from 0-11KHz
>> configurable modulation factor


Onboard tone generator for use as the carrier signal
>> useful in its own right as a quality signal generator
>> up to 8 razor sharp oscillators
>> triangle, square, sawtooth and sine wave shapes
>> individual pitch, fine tune, volume, wave shape
and mute controls for each oscillator


Modulate anything with anything!!!
>> As an alternative to using the onboard tone generator, the Vocoder has a secondary mode which allows it to use the left audio input as the modulator and the right audio input as the carrier (or vice versa)


32-bit IEEE Floating Point internal signal path for increased signal accuracy


Code optimization for Realtime performance on modern Pentium processor types
>> uses between 1 - 3% CPU on an AMD Athlon XP1500 !!
>> uses 10-20% CPU on Intel Celeron 433MHz laptop


Direct-X Plugin Architecture is compatible with most PC audio editing software


All parameters Fully automatable in supported host applications such as Cakewalk's Sonar 2.0


Import/Export parameter settings to a spreadsheet file - indispensable for transferring between different host applications

http://www.encircle.co.uk/sonicism/

Download:

http://sourceforge.net/project/showf...kage_id=169088

Dr-Fusion 2 Released free with 560+samples

http://odosynths.panicnow.net/drf3b.gif

Dr-Fusion 2 is a drum sampler and synth with:
7 instruments with dual samples (kick, 2 snares, 2 percussion, hihat, ride and crash,
2 instruments with dual samples into which the user can load samples,
2 instruments with single sample slots (closed hihats, claps)
2 synths for toms and kicks,
pads (for auditioning), LEDs (for monitoring) and Mute buttons
2 samples can be loaded into many of the instruments for layering (the second sample can be muted), over 560 samples are built in,
each sample-based instrument has a comprehensive set of controls (many can be automated),
tune (1 octave), octaves and volume controls for each sample,
main volume, volume envelope (ADSR), pan,
any one of four FX: Distortion, Filter, Bit Crusher and Clipper, each with their own controls.

The kick, snares, percussion and hihats each have over 120 samples available, there are 61 closed hihats, 30 ride and crashes, and 35 claps

In addition, DR-Fusion has two drum synths, for kick and tom.
And, finally, there are 35 Drum kits presets, and you can set up your own using the integrated samples and synths.

there are also helpfiles made by DarkStar
special thanks to
Sink
Soma
darkstar
and Zvon

http://odo.nl.nu/

http://odosynths.panicnow.net/DRF2.rar

TB-Unknown v2

http://odosynths.panicnow.net/newunk.gif

Type: Synth (Bass?)

http://odo.nl.nu/

http://odosynths.panicnow.net/TB-Unknown2.rar

Cygnus

Space gui:

http://www.krakli.co.uk/graphics/cygnus310.jpg

Conventional gui:

http://www.krakli.co.uk/graphics/odo310.jpg

Designed for Pads , Ambient space sounds and other worldly effects, CYGNUS is offered with a full compliment of 384 patches and a choice of GUIs. The space GUI has no conventional controls and is designed to be used in an almost random pattern. The OdO version is more conventional and will provide a more familiar environment that some users will prefer to work in..
Both versions are fully patch compatible and will happily live alongside each other in your plug-ins folder*
Originally conceived by the renowned Tim Conrardy, Cygnus has quickly become many users favorite space synth

What some users have already said about CYGNUS: "Best Free VSTi of the year" - Canned Heat KvRAudio Forum
"Get it, it's hyper hyper spacy spacee! Honestly, a fantastic synth... " - thomekk FLStudio LoopTalk Forum
"Awesome, phenominal, gorgeous, and DEEP! " - Dungeon Studio Orion Center Forum


http://www.krakli.co.uk/cygnus.htm

Both versions + all patch banks:

http://www.krakli.co.uk/zips/Cygnus.zip

Naive LPF v 0.5

http://admiralquality.dynu.com/vstde...PF_GUI_640.jpg

Naive LPF v 0.5 is a resonant low-pass filter with envelope follower.
This filter has been developed to closely model the way some real world analog circuits work, as opposed to some other techniques which, while well adapted to the math processing power of a computer, just don't seem to render the same organic feel. Not to say that those techniques aren't just as valid, but I was going for a vintage, analog feel on this one. I'm primarily using this project as a test-bed for a full soft-synth, and in that realm we typically want "colorful" filters to make "warm" sounds. This was not intended to be a "clean" or "transparent" filter by any means! It is my first attempt at an audio filter, my first VST plugin, and my own first guess at how to approach a low-pass filter -- hence the name "Naive LPF". But really at this point it should be called the "Not-So-Naive LPF", because it's actually a quite sophisticated implementation and it's turning out to be useful. I'm finding it really does capture some of that vintage warmth I'm always looking for.


You will find this filter has a very warm, even distorted, analog flavor. But the distortion it does impart tends to sound very musical to the ear, particularly when processing individual instrument tracks (though it does some cool stuff when run on an entire mix too!)

Version 0.5 adds a gratuitous GUI, and about 6 MB to the download, but it sounds better for it! ;)

http://admiralquality.dynu.com/vstdev/

damn i havent checked in here for a while......grabbin some :rambo:

thanks!

thanx loopadon very nice thread ive been here for 1 hour + half now collecting some tools cheers buddy if we ever meet remind me i oh you a drink :lol:

can you tell me do have anyware i can get the tc works spark cut filter its old but a great plugin i need it desperatly....its cool for put on your master chanel in vst and recording real time , i love it please dio you no anyware i can get it its not on the tc works site :cry:

great work loopdon. i just went through the whole lot for my new computer!!!! feckin loads of installing to do

i really want that commodore 64 emulator tho, the link wouldnt work!

THANKS AGAIN !!!