Hi, everyone! Does anyone out there know how to set-up a midi controller such as the Edirol / Roland PCR-30 to programme such synths as an Oberheim Matrix6 or old Yamaha synths ?
Thanks before hand :!:
Welcome to the Blackout Audio Techno Forums :: Underground Network.
 |
 |
 |
 |
Results 1 to 4 of 4
Thread: Edirol / Roland PCR-30
-
26-08-2004, 01:32 PM #1Junior Freak
- Join Date
- Mar 2004
- Location
- Tokyo,Japan.
- Posts
- 86
Edirol / Roland PCR-30
-
27-08-2004, 12:11 PM #2Junior Freak
- Join Date
- Jul 2004
- Location
- Lisbon, Portugal
- Posts
- 217
U'll need 2 get down with the original manual for the old synth and find out what CC/ NRPN or SySex was used 4 each funtion.. then just use the PCR software editor 2 program these into a patch, name, save and send 2 the PCR's memory...!
Z
-
27-08-2004, 02:36 PM #3Junior Freak
- Join Date
- Mar 2004
- Location
- Tokyo,Japan.
- Posts
- 86
Thanks Z, I found the sysex info on hyperreal a while back, but translating the data that's on this page to what to put into the PCR is a little confuseing
can you see what you can make of it ?
http://machines.hyperreal.org/manufa...sysex.edit.txt
Cheerss.
-
28-08-2004, 11:22 AM #4Junior Freak
- Join Date
- Jul 2004
- Location
- Lisbon, Portugal
- Posts
- 217
Hey,
Please try and c if it is possible 2 program via Continuous controllers (CC messages), I'm not that versatile with Sysex... althoug if the synth sends these messages U cal always program from the front pannel/ knobs, record 2 a midi track in SX (repeat till u get what u want) and then press play!
I know some of the Old Matrix had dedicated knob boxes/ editors so I would b willing 2 bet that they'll be a bi*h 2 program! :(
Z
Reply With Quote