I have my mpc 1000 running into my djm 600, the sound was coming out really distorted so I lowerd the db level. This worked grand but the volume is very low now. I want to use it in clubs so I need to make it louder without the distortion. any help at all would be great!
Welcome to the Blackout Audio Techno Forums :: Underground Network.
 |
 |
 |
 |
Results 1 to 5 of 5
Thread: Akai mpc 1000 question
-
08-09-2004, 03:02 PM #1BOA Newbie
- Join Date
- Aug 2004
- Location
- Techno Dublin
- Posts
- 46
Akai mpc 1000 question
-
08-09-2004, 05:35 PM #2Junior Freak
- Join Date
- Jul 2004
- Location
- Lisbon, Portugal
- Posts
- 217
check the gain level, make sure U have the mpc connected 2 the Line in instead of the phono input!
On the djm 600 check the output limiter, a screw on the back...
Z
-
09-09-2004, 01:12 AM #3BOA Newbie
- Join Date
- Aug 2004
- Location
- Techno Dublin
- Posts
- 46
Thanks alot, I'll try that and let you know. I was thinking of getting a compressor for it, any need do you think? I'm new to hardware btw, so I'm a bit slow to it all.
-
09-09-2004, 07:46 AM #4Supreme Freak
- Join Date
- Oct 2003
- Location
- Belfast
- Posts
- 601
you would need a bigger mixer with inserts if you want to use a compressor, dont think it would work with your djm
-
09-09-2004, 02:35 PM #5Junior Freak
- Join Date
- May 2003
- Location
- ohio-usa
- Posts
- 380
as far as I know the 1000 has a built in compressor that can be assigned to the stereo outs...i've not fooled with it, but it can't hurt.
Reply With Quote