hi, yeah im having probs getting sound out of sx3. ive got a midi channel 1 up and the vst lm7 open on the channel. ive set midi channel 1's out to lm7. and put some notes in the key editor. ive opened mixer 1 and when i press play the midi channels leds are going up and down as if sound is playing. but no sound is coming out.
please help
Welcome to the Blackout Audio Techno Forums :: Underground Network.
 |
 |
 |
 |
Results 1 to 10 of 10
Thread: sx3 no sound
Hybrid View
-
04-12-2005, 04:27 PM #1Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
sx3 no sound
-
04-12-2005, 06:11 PM #2Administrator
- Join Date
- Oct 2002
- Location
- Leeds, UK
- Posts
- 6,637
make sure you record enable the track (ie the red becord button ON THE CHANNEL)
then if that doesnt work make sure you've set your sound card as the output device in the prefs
-
04-12-2005, 06:30 PM #3Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
cheers man
-
04-12-2005, 07:02 PM #4Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
just enabled the record on the channel and its still not having it. but when the channels out is on microsoft gs wavetable sw synth. it sounds a piano. and i imported a loop into an audio channel and that didnt sound either
-
04-12-2005, 07:47 PM #5BOA Lifetime Member
- Join Date
- Nov 2004
- Location
- dublin
- Posts
- 2,781
its not an answer, but i think when the midi led goes up and down, that doesnt mean there is audio! it just means MIDI has been triggered.
only on audio tracks does that mean the level of audio coming out. have gone to the inspector window and assigned the midi track to the LM7??
-
04-12-2005, 09:40 PM #6Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
nah i havnt. i'll giv it a go. cheers fella
-
05-12-2005, 10:45 AM #7Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
where abouts is the inspector window??
-
08-12-2005, 04:32 PM #8Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
where do i select my soundcard in sx3. ive gone in preferences & into the different audio settings in there but i cant find anything saying about soundcard options. how do i get my soundcard options up??
-
10-12-2005, 03:48 PM #9Junior Freak
- Join Date
- Aug 2003
- Location
- alleybeating
- Posts
- 453
i just bought cubase SX3 and upgraded from SX1 and i can see why you can be a bit confused at first....
go to devices/vst connect/ and click on the input and output tabs
check to make sure that your audio output device is set to your sound cards stereo L and R. If nothing is there, then you might have to install the soundcard drivers (asio) or whatnot...
even if your soundcard shows up, you still will not get a signal if its not routed to the right busses.....
-
10-12-2005, 11:13 PM #10Supreme Freak
- Join Date
- Dec 2004
- Location
- WILTSHIRE
- Posts
- 729
nice 1 tek i'll giv that a go. i got into the vst connect the other day the soundcard was listed in there. but i didnt check the audio output device
cool
Reply With Quote