For anyone using a UC33e with Ableton!!!

[stjohn]

heres something ive been been doing today and i thought some of you might use it also. its 3 presets for the UC33e along with an ableton setup to achieve the following.

UC preset 1: 8 Track Mixer with Sends
UC preset 2: 3 band Eq
UC preset 3: Assignable Master / Track FX

midi buttons 1-9: turn fx on or off.

first you'll need to load the Bank to the UC33e. to do this, download enigma form the m-audio website, install it and load this bank:

http://www.chrome-metronome.net/AbletonSetup.xml

clicking the 3rd set of arrows on the top left of Enigma will load the bank to your controller. you have to restart computer to allow ableton to use the UC.

then if you want to use my default:

http://www.chrome-metronome.net/EQ.als

with this setup, each of the 8 channels and 9 midi buttons will be controlled from any of the 3 presets which should be good fdr anything live. the difference in each preset being, in preset 1 the knobs control the send, 2 -> all the 3 band EQs, and 3 -> assignable fx.

there should be no crossover in regards to conflicting Midi CC's, which i why i had to reprogram it at the beginning. you may want to tweak your EQ settings, and set up the FX settings on preset 3 to your liking.

Hope this helps some of you ;)

[stjohn]

ive just updated the Uc33e bank (xml file) so that the controller knobs in preset 4 can be assigned to anything too..

[loopdon]

thanks man! great effort. must try that :thumbsup: x 10