Thanks for advice, we have sorted out that aspect of the desks I believe - cheers.




Nice 1 :)





We have another couple of questions tho regards the audio mixdown function of Cubase SX:

In audio mixdown function (all the audio files are merged into 1 track) not all of the channels are getting merged. The stereo channels aren't getting thro, just some of the mono channels.

1) How do we get all the channels to go into mixdown - save as one track?



here is the rule of thumb 4 audio mixdown in cubase... b4 u export listen only 2 the master out of cubase, meaning that if u have other stuff routed 2 bus out 2 or something, this will not show up on the mixed down final file! So basically listen 2 yer sound card main out ... what U hear is what u get!!




2) How do we connect the outputs of midi instruments to the audio inputs (RME Hammerfall soundcard) ?





Mate there is a major confusion in here, MIDI carries only info, no sound!!!
U get sound when u direct that info 2 a synth (hardware / software)... IF that info corresponds 2 certain infos necessary 2 make a synth "sing"...

So I assume u wanted 2 ask how u get the audio output 2 the rme's inputs thru the desk...
Again assuming u have ADAT In and Out connected 2 from the 01v 2 the RME...

In Cubase go to devices select VST INPUTS, active all ADAT INs.
In the mixer select options (this 4 the 01v, the 01v 96 might b slightly diferent) press as many times as u need till u get the output routing..
there u have 8 buses.. select the channels u r using 4 the instrument on the relevant bus.. let's say it's 4&5...
In cubase add an audio track.. now choose as input : 4&5 ...

Press record if needed!! :)


Hope this helpz...

Z