Welcome to the Blackout Audio Techno Forums :: Underground Network.
Results 1 to 5 of 5
  1. #1
    BOA Lifetime Member
    Join Date
    Mar 2003
    Location
    South West of England
    Posts
    5,460

    Default This may seem a bit thick....

    but whats situation should you use a limiter and how similar are they to compressors?

  2. #2
    BOA Lifetime Member
    Join Date
    Aug 2004
    Location
    Münster, Germany
    Posts
    2,753

    Default

    I'd use a limiter over a master. Limiters are compressors, the ratio used is what separates the two.

    "Compressor - Limiter, What is the Difference Between Them?

    There is quite a bit of confusion about the difference between a compressor and a limiter. The knobs are the same. Many compressors are labled as a Compressor/Limiter. They both seem to process dynamic levels and work the same way.

    So what is the difference?

    The main difference is the Ratio. A limiter uses a Ratio of 10:1 - 100:1 or more, while a compressor will use a Ratio of 10:1 or less. With the compressor using a lower ratio, we can compress at a lower threshold with out killing the track from too much gain reduction and use it on a larger part of the track's dynamic range, were as the Limiter should be used more often on sources that have peaks or spikes. It is important to understand that they both can be functional for most duties, but one can usually perform better then the other depending on the need.

    For example:

    Want to reduce peaks so you can increase the average level an extreme amount? - Use a limiter

    Want to achieve a more consistent average level and not crush the peaks? - Use a compressor.

    You like the way your track sounds but have a few unwanted peaks? - Use a limiter.

    Want to bring up a few quiet parts of the track? - Use a compressor."


    http://www.recordingproject.com/arti...ticle=6&page=4

    Others say limiting starts at 20:1, not 10:1. Just to add to the confusion

    :)

    Another article:

    http://www.sweetwater.com/expert-cen.../d--02/03/1998
    Last edited by loopdon; 27-02-2007 at 10:06 AM.

  3. #3
    BOA Lifetime Member
    Join Date
    Mar 2003
    Location
    South West of England
    Posts
    5,460

    Default

    thanks man :;

  4. #4
    Junior Freak
    Join Date
    May 2005
    Location
    Brisbane, Australia
    Posts
    374

    Default

    Not a stupid question at all actually ;) I scratched my head many a time on this issue when I was first learning about compression. Funny how sometimes even the easy answers are hard to find.

  5. #5
    BOA Lifetime Member
    Join Date
    Oct 2003
    Posts
    10,306

    Default

    a limiter is a compressor

    Just used to limit volume, rather than "beefing up" through compression. Same thing though

    So its down to use really

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top