Ocassionally, one of my decks cuts out on one side, so theres only sound coming out of one side. If i turn it off an on again its fine.
Any ideas?
Welcome to the Blackout Audio Techno Forums :: Underground Network.
 |
 |
 |
 |
Results 1 to 9 of 9
Thread: Turntable Trouble
Hybrid View
-
12-11-2003, 02:29 PM #1Ultimate Freak
- Join Date
- Feb 2003
- Location
- Plymouth
- Posts
- 1,439
Turntable Trouble
-
12-11-2003, 02:35 PM #2BOA Lifetime Member
- Join Date
- Jun 2003
- Location
- BRISTOL , UK
- Posts
- 3,193
Hammer !
-
12-11-2003, 03:05 PM #390's Trance head
- Join Date
- Jun 2003
- Location
- UK - Northwest
- Posts
- 3,121
thats quite strange, a turntable will send audio to the mixer if its pluged in or not so it points towards something being loose or worn out within the turntable.
(that is if i have understood what u mean)
have u tried the turntable on another mixer channel, did the sound come back on when u turned the deck on then off or the mixer on then off, its important to make sure which unit is causing the problem.
check the phono cables from the turntable that is causing problems, if there not removable (i.e technics etc) make sure that it hasnt been yanked loose inside, if it keeps happening send them off to the manurfacturer or contact the place of purchase.
just to be safe swap the headshells on the decks too incase it lies in a faulty headshellSequence is coming. It's going throughout your imagination. It takes you where you've been before. A higher state of mind. Yeah, you remember the early times. Now were trying to take you again. In the deepest seas of your consciousness.....Time never stops
-
12-11-2003, 03:09 PM #4BOA Lifetime Member
- Join Date
- Jun 2003
- Location
- BRISTOL , UK
- Posts
- 3,193
dodgy cable , signal interferance from speaker or amp , solder gone inside !
-
12-11-2003, 04:39 PM #5Ultimate Freak
- Join Date
- Feb 2003
- Location
- Plymouth
- Posts
- 1,439
Cheers emo, no its when i turn the deck on an off, and the cables do disconnect.
Ive been mixing all afternoon and it hasnt done it again. But hopefully its the cable. If it starts again i will swap the cable an see if theres a difference. ;)
-
12-11-2003, 04:41 PM #690's Trance head
- Join Date
- Jun 2003
- Location
- UK - Northwest
- Posts
- 3,121
good man
Originally Posted by K Front
probobly something small that is easily sorted :)Sequence is coming. It's going throughout your imagination. It takes you where you've been before. A higher state of mind. Yeah, you remember the early times. Now were trying to take you again. In the deepest seas of your consciousness.....Time never stops
-
12-11-2003, 06:08 PM #7Ultimate Freak
- Join Date
- Feb 2003
- Location
- Plymouth
- Posts
- 1,439
Hopfully mate, i love my decks to bits. Originally Posted by emotioncomplex
good man Originally Posted by K Front
probobly something small that is easily sorted :)
-
21-11-2003, 08:51 AM #8BOA Newbie
- Join Date
- Nov 2003
- Location
- Leeds
- Posts
- 34
I was just about to start a topic on a very similar subject. I know what the problem with one of my decks is though, I think.
Because they're now about 5 or so years old, the RCA connectors have gone a bit baggy & aren't making proper contact with the mixer's inputs.
Anyone had to replace these before or got a rough idea of how much it'll be?
-
21-11-2003, 08:52 AM #9BOA Lifetime Member
- Join Date
- Jun 2003
- Location
- BRISTOL , UK
- Posts
- 3,193
bout £4 an 5 mins soldering :lol:
Reply With Quote