Thanks for that guys...
I have been a bit heavy on the chopping of the bottom end, so will loosten things up a bit on that side... then re-do all my levels again - sometimes you get lost with the up down up down of it all, and think things are ok...
Challenge is that the acid line is off the back of a pre-set, so bass and oscillator are on the one channel... I'll have to babble about that when I see you next Steve....
Right, I'm on it....
Welcome to the Blackout Audio Techno Forums :: Underground Network.
 |
 |
 |
 |
Results 1 to 10 of 10
Hybrid View
-
18-09-2007, 11:42 AM #1Supreme Freak
- Join Date
- May 2006
- Location
- The Depths - London
- Posts
- 605
-
18-09-2007, 09:01 PM #2Supreme Freak
- Join Date
- Jan 2003
- Location
- Around the back of the third moon off Tyrisia
- Posts
- 516
/\/\ What they said
It's got potential though dude, change your verb defo, you need one with more depth.Check out Tyrisia at Myspace
-
22-09-2007, 03:30 AM #3Supreme Freak
- Join Date
- May 2006
- Location
- The Depths - London
- Posts
- 605
Right, I've had another crack at this based on the pointers you guys have given... It's definitely improved so should be closer to 'tweaking' stage... I hope goddamit:exclaim: heh heh
http://www.speedyshare.com/513240896.html
As I mentioned, the challenge is that the acid line is part of a preset, so it runs as a filter on top of the bassline oscillator...
I have Audio Realism n thought about using that instead, but I aint got the knowledge to emulate the same sound - which probably would be better if I could...
Any ideas on what I could run just underneath it, to fatten the bottom end of the acid line and how I would layer it... PLEASE!!
:icon5:
Reply With Quote